160T3200 E310P Dual-Servo Press Brake for Carbon Steel and Checker Plate in India
A delivered dual-servo press brake project for an Indian sheet metal customer processing carbon steel plate and checker plate.
Project at a Glance
Key parameters that define this delivered project.
Customer Requirement
What this project needed from the machine configuration.
Bend 5mm carbon steel plate and checker plate
Use a configuration suitable for general fabrication work
Maintain stable bending performance for different plate types
Match the project's daily processing needs
Why This Machine Was Chosen
Technical factors behind the machine configuration decision.
The customer required a press brake solution suitable for both carbon steel plate and checker plate processing. For this type of fabrication work, machine stability and configuration suitability are important for achieving consistent forming results.
The 160T3200 E310P dual-servo press brake provided a practical machine setup for this application range. It matched the material type, bending requirement, and general fabrication needs of the project.
The final machine configuration was selected based on the customer's plate type, thickness, and expected application scenario.
160T tonnage capacity
Adequate force for 5mm carbon steel plate and checker plate bending with a practical safety margin.
3200mm working length
Extended bed length suitable for longer plate parts and general fabrication workpiece handling.
E310P dual-servo drive
Dual-servo system provides more responsive control and stable bending performance for plate forming tasks.
Configuration matched to plate types
Machine parameters set to handle both plain carbon steel plate and checker plate with consistent results.
160T3200 E310P dual-servo press brake installation at customer facility in India
Typical Parts for This Configuration
Typical parts for this configuration include floor support parts, platform components, checker plate fabricated parts, and other general sheet metal fabrication components.
Floor Support Parts
Platform Components
Checker Plate Fabricated Parts
General Sheet Metal Components
Typical plate and checker plate bending applications for dual-servo press brake
Project Result
The machine achieved the expected bending result for 5mm carbon steel plate and checker plate processing.
The 160T3200 E310P dual-servo press brake was delivered and achieved the expected bending result for carbon steel plate and checker plate applications. The dual-servo configuration provided stable forming performance for the intended fabrication work.
This project serves as a useful reference for buyers looking for a dual-servo press brake solution for common fabrication applications involving multiple plate types.
Achieved the expected bending result for 5mm plate and checker plate
Dual-servo system delivered stable bending performance
Machine delivered and commissioned successfully
Factory acceptance completed
Project documentation — machine delivery and commissioning in India
Helpful Resources for Similar Buyers
Continue your research on machine selection and sheet metal fabrication.
Press Brake Buying Guide
Full guide to selecting a press brake for your material, thickness, and bending length requirements.
How to Choose a Press Brake
Step-by-step guidance on matching tonnage, bed length, and backgauge to your application.
Press Brake Price Guide
Understand the key factors that affect press brake pricing and how to evaluate configuration value.
Press Brake Tonnage Calculator
Calculate required tonnage based on your material, thickness, and bending length.
Explore Related Solutions
Find machine series, application pages, and contact paths relevant to your project.
Dual-Servo Press Brake Series
Browse dual-servo press brake configurations available in 40T to 400T tonnage ranges.
Sheet Metal Fabrication Solutions
See how press brakes are applied across different sheet metal fabrication scenarios.
Plate Bending Solutions
Browse configurations suited for medium-thickness plate bending and fabrication applications.
Press Brake Buying Guide
Step-by-step guidance on choosing the right press brake tonnage, bed length, and configuration.
Need a Dual-Servo Press Brake for Plate and Checker Plate Bending?
Send us your material, thickness, bending length, or drawing, and we will recommend a suitable dual-servo press brake configuration for your project.